ACCESSORIES

Brackets, walers, tools and more. Contact us if you don’t see what you’re looking for.

SCAFFOLDING BRACKETS

This 24″ aluminum or steel scaffolding bracket fits on any panel. It offers 2 attaching systems. It can be attached to 2 bolts or one with a nail fixed to the bottom.  It is offered with a pocket to install a guard rail.

Options: Aluminum or steel

ALUMINUM WALER BRACKET

This bracket is designed to be used as a shelf to support tools and any other materials.  The top is attached to a bolt on the panel and the bottom can be fixed with a nail.

*NOT FOR SCAFFOLDING

STRONGBACK WALER WITH WEDGE

Attacked to a bolt and with a 2″X4″ inserted vertically.  This strong back waler is designed to keep formwork securely in place when stacking.

DOUBLE STRONGBACK WALER WITH WEDGE

This aligner is attached to the bolt.  To be used with 2X4 Lumber.

STRONGBACK WALER WITH SCREW

Attached to a bolt and with a 2X4. Inserted vertically and horizontally, this strongback waler is designed to keep formwork securely in place when stacking.

WALL ALIGNER WITH WEDGE

Attached with a bolt and with a 2X4, inserted horizontally, this product is designed to keep formwork straight.

90° BRACKET

This 90° bracket is designed to replace standard neutral corners.  It can be used on any panel size. A set of clips can replace many sized of standard corners.

Triple Break-off Tool 

This tool is used to quickly and easily break off ties.

It can also be used to screw and unscrew nuts on panels.

FORM AND CORNER STRIPPER

This tool makes it easier to strip off forms and corners.

HALF-CLIP

The half-clip is used when forming against an existing wall or footing steps. The half-clip will hold the tie firmly in it’s notch.

BOOM HOOK

This device assists in handling form cages.

CORNER CLIP

Corner clips hold panels and corners that don’t have latched firmly together. This is a multifunctional tool.

6″ LATCH 

the 6″ latch is designed to attach a tie to the adjacent panel.

REINFORCED TOP WALER

This waler is used to correct and secure the alignment at the top of the formwork.